iConverter CWDM Multiplexers

 

 

Omnitron’s iConverter Coarse Wave Division Multiplexing (CWDM) Multiplexer/Demultiplexer modules support ITU-T G694.2 wavelengths between 1270nm to 1610nm in 20nm increments. iConverter CWDM modules are protocol and rate transparent allowing different services up to 10Gbps each to be transported across the same single-fiber or fiber pair link.

 

Omnitron’s iConverter CWDM networking products are a reliable and cost-effective solution for increasing bandwidth capacity over existing fiber infrastructure in Service Provider and Enterprise networks. These modular CWDM products multiplex up to sixteen independent wavelengths over a single fiber optic connection (either a fiber pair or a single fiber) in protected or unprotected configurations.

 

iConverter CWDM modules utilize a small and scalable plug-in form factor, and can be installed in any powered or unpowered iConverter chassis achieving some of the highest port densities in the industry.

The modules are designed to be integrated with other iConverter media converters and transponders to provide a true multi-service platform capable of delivering Ethernet, TDM, SONET and other services across a CWDM common link.

 

iConverter CWDM/X Multiplexer/Demultiplexer

Omnitron’s iConverter CWDM/X Coarse Wave Division Multiplexing (CWDM) Multiplexer/Demultiplexer (MUX/DEMUX) modules are protocol and rate transparent allowing different services up to 10Gbps each to be transported across the same fiber link.

 

The small and compact size of the CWDM/X modules yields one of the highest port densities in the industry. 

The passive iConverter CWDM/X modules are available in 4 and 8-Channel (wavelength) models, supporting a variety of wavelength combinations and port configurations. The Single-Fiber iConverter CWDM/X modules are available in 2 and 4-Channel models.

 

The CWDM/X features an optional Expansion Port that can be used to cascade two MUX/DEMUX modules, doubling the channel capacity on the common fiber link. The dual fiber CWDM/X also features an optional 1310nm Pass Band Port that can be used to overlay up to 8 CWDM channels on an existing legacy 1310nm network such as SDH or SONET.

 

iConverter CWDM X.pdf
PDF-Dokument [1.3 MB]

iConverter CWDM/AD Add/Drop Multiplexer

iConverter CWDM/AD modules add (multiplex) and drop (demultiplex) selected channels, or wavelengths, on both directions of a CWDM fiber route.

 

Using iConverter CWDM/AD modules, network designers can add new access points anywhere on a CWDM network, without impacting the remaining channels traversing the network. 

The iConverter 1-Channel CWDM/AD modules multiplex and demultiplex one specific CWDM channel from the common dual fiber or single-fiber CWDM fiber link. Eighteen models of the 1-Channel CWDM/AD are available to support all CWDM wavelengths specified by ITU-T G.694.2, ranging from 1270nm to 1610nm.

 

iConverter CWDM AD.pdf
PDF-Dokument [1'016.8 KB]

iConverter CWDM/X

Optische 4- und 8-Kanal-Multiplexer/Demultiplexer
 

Die CWDM- (Coarse Wave Division Multiplexing) Multi-plexer/Demultiplexer-Module (MUX/DEMUX) des iConverters CWDM/X von Omnitron unterstützen ITU-T G694.2-Wellenlängen zwischen 1270nm und 1610nm in Schritten von 20nm. iConverter-CWDM/X-Module sind protokoll- und ratentransparent. Damit können ver-schiedene Dienste bis zu 10Gbps über die gleiche LWL-Leitung transportiert werden.

 

8860DS-N_iConverter_CWDM-X.pdf
PDF-Dokument [1.0 MB]

iConverter Einzelfaser-CWDM/X

Optische Einzelfaser-4- und 8-Kanal-Multiplexer/Demultiplexer


Die iConverter Einzelfaser-CWDM-Module sind eine flexible, kostengünstige Lösung zur Erhöhung der Faserkapazität in Einzelfasernetzen. In Einzelfasernetzen erhöht CWDM die Bandbreite durch die Ermöglichung mehrerer Wellenlängen oder Datenkanäle, die unabhängige Dienste auf der vorhandenen LWL-Infrastruktur transportieren. Mit iConverter Einzelfaser-CWDM-Modulen können bis zu 16 separate Wellenlängen auf einer Einzelfaser-Verbindung laufen.
 

iConverter_Single-Fiber_CWDM.pdf
PDF-Dokument [1.5 MB]

iConverter CWDM/AD

Optische 1- und 2-Kanal-Add/Drop-Multiplexer

 

Die iConverter-CWDM/AD-Module können in jedem mit anderen iConverter-Medienkonvertern und ‑Transpondern ausgerüsteten iConverter-Chassis installiert werden und bieten eine Mehrdiensteplattform für Ethernet, TDM, SONET und andere Dienste auf einer gemeinsamen LWL-Verbindung.
 

iConverter_CWDM-AD.pdf
PDF-Dokument [697.8 KB]

iConverter Einzelfaser-CWDM/AD

Optische 1-Kanal-Einzelfaser-Add/Drop Multiplexer

 

Die iConverter Einzelfaser-CWDM-Module sind eine flexible, kostengünstige Lösung zur Erhöhung der Faserkapazität in Einzelfasernetzen. In Einzelfasernetzen erhöht CWDM die Bandbreite durch die Ermöglichung mehrerer Wellenlängen oder Datenkanäle, die unabhängige Dienste auf der vorhandenen LWL-Infrastruktur transportieren. Mit iConverter Einzelfaser-CWDM-Modulen können bis zu 16 separate Wellenlängen auf einer Einzelfaser-Verbindung laufen.
 

 

iConverter_Single-Fiber_CWDM.pdf
PDF-Dokument [1.5 MB]

News

Produktneuheit​

Omnitron Systems Multi-rate / Multi-gig Media Converters

Druckversion | Sitemap
© © Lanopia GmbH